บริษัท โนวาเท็ค ปั๊ม โซลูชั่น จำกัด

Blacoh SENTRY™ · Inlet Stabilizer

10IN3 – 2310IN3 (SENTRY III, II, I, IV, V) · Automatic Inlet Stabilizer

Inlet stabilizer (suction stabilizer) ติดตั้งที่ทางเข้าปั๊ม ทำหน้าที่เป็น accumulator ที่เก็บของเหลวและจ่ายกลับเข้าปั๊มขณะดูด ปั๊มจึงดูดจากตัว stabilizer แทนท่อ ช่วยตัด acceleration head loss ลดโอกาสเกิด cavitation และทำให้ห้องปั๊มเติมเต็มทุกจังหวะดูด ใช้กับปั๊ม positive displacement เช่น AODD และ peristaltic โดยเฉพาะงานดูดจากถังไม่มีแรงดันหรือของเหลวหนืด

  • ปริมาตร: 10 in³ (0.16 L) – 2310 in³ (37.85 L)
  • ขนาดทางเข้า: 0.375″ (10mm) – 6″ (150mm)
  • Pressure rating: 150–1000 psi (10.3–68.9 bar) ตามรุ่นและวัสดุ
  • Air control: Chargeable (SENTRY III, II, I, IV, V); Automatic (Automatic Inlet Stabilizer)
  • ปั๊มที่ใช้ร่วม: Positive displacement เช่น AODD, peristaltic

SENTRY™ Inlet Stabilizer ตัวรักษาเสถียรภาพด้านดูดของปั๊ม

Blacoh SENTRY™ · Inlet Stabilizer

10IN3 – 2310IN3 (SENTRY III, II, I, IV, V) · Automatic Inlet Stabilizer

Inlet stabilizer (suction stabilizer) ติดตั้งที่ทางเข้าปั๊ม ทำหน้าที่เป็น accumulator ที่เก็บของเหลวและจ่ายกลับเข้าปั๊มขณะดูด ปั๊มจึงดูดจากตัว stabilizer แทนท่อ ช่วยตัด acceleration head loss ลดโอกาสเกิด cavitation และทำให้ห้องปั๊มเติมเต็มทุกจังหวะดูด ใช้กับปั๊ม positive displacement เช่น AODD และ peristaltic โดยเฉพาะงานดูดจากถังไม่มีแรงดันหรือของเหลวหนืด

  • ปริมาตร: 10 in³ (0.16 L) – 2310 in³ (37.85 L)
  • ขนาดทางเข้า: 0.375″ (10mm) – 6″ (150mm)
  • Pressure rating: 150–1000 psi (10.3–68.9 bar) ตามรุ่นและวัสดุ
  • Air control: Chargeable (SENTRY III, II, I, IV, V); Automatic (Automatic Inlet Stabilizer)
  • ปั๊มที่ใช้ร่วม: Positive displacement เช่น AODD, peristaltic

จุดเด่นของ SENTRY Inlet Stabilizers

  • ตัด acceleration head loss ปั๊มดูดของเหลวจาก stabilizer แทนการเร่งของเหลวทั้งแนวท่อ
  • ลด cavitation ลดความเสี่ยงการเกิดโพรงไอที่ทำให้ปั๊มเสียหาย
  • เติมห้องปั๊มเต็มทุกจังหวะ การไหลด้านดูดสม่ำเสมอ ห้องปั๊มเติมเต็มทุกจังหวะดูด
  • ยืดอายุไดอะแฟรม ลดแรงสั่นและความล้าของชิ้นส่วนในระบบ
  • ลด water hammer ลดความผันผวนของความดันและ pressure spike
  • เกจด้านดูดแม่นยำขึ้น ความดันนิ่งขึ้น อ่านค่าเกจด้านทางเข้าได้แม่นยำขึ้น
  • Chargeable air control ตั้งค่าได้ทั้งงาน suction lift และ positive inlet ผ่าน gas fill valve โดยไม่ต้องต่อลมอัดถาวร
  • ทดสอบความดันจากโรงงาน ทุกชุดผ่านการทดสอบความดันก่อนส่ง
  • ผลิตใน USA แผ่นพับระบุว่า pressure body ผลิตใน USA

ข้อมูลจำเพาะทางเทคนิค

ภาพรวมรุ่น

รุ่น ปริมาตร ขนาดทางเข้า Pressure rating Air control
10IN3 SENTRY III 10 in³ (0.16 L) 0.375"–0.75" (10–20mm) 150 psi (10.3 bar); PVDF 200 psi (13.7 bar); 1000 psi (68.9 bar) Chargeable
85IN3 SENTRY II 85 in³ (1.4 L) 0.5"–1.5" (15–40mm) 150 psi (10.3 bar); PVDF 250 psi (17.2 bar); 1000 psi (68.9 bar) Chargeable
370IN3 SENTRY I 370 in³ (6.06 L) 1.5"–2.5" (40–65mm) 150 psi (10.3 bar); PVDF 200 psi (13.7 bar); 1000 psi (68.9 bar) Chargeable
1155IN3 SENTRY IV 1155 in³ (18.93 L) 3"–6" (80–150mm) 150 psi (10.3 bar); 275 psi (18.9 bar) Chargeable
2310IN3 SENTRY V 2310 in³ (37.85 L) 3"–6" (80–150mm) 275 psi (18.9 bar) Chargeable
SENTRY Automatic Inlet Stabilizer — 1.5", 2" +50/−30 psi (+3.45/−2.07 bar) Automatic

ปริมาตรจาก Capabilities Guide ข้อมูลอื่นจากหน้า Inlet Stabilizers และ Automatic Inlet Stabilizer บน blacoh.com

10IN3 SENTRY III

ข้อมูล 10IN3 SENTRY III
ปริมาตร 10 in³ (0.16 L)
วัสดุตัวเรือน (Housing) Acetal, CPVC, Polypropylene, PVC, PVDF, Alloy 20, Hastelloy C, Stainless Steel, 30 RA Polished SS
วัสดุ Bladder Buna-N, EPDM, Hypalon, Neoprene, PTFE, Santoprene, Silicone (Food Grade), Viton
ขนาดทางเข้า 0.375" (10mm), 0.5" (15mm), 0.75" (20mm) Tri-clamp
รูปแบบการต่อ FNPT, BSP, ANSI Flange, DN Flange, Socket Weld, Tri-Clamp, Union
Pressure rating 150 psi (10.3 bar), PVDF 200 psi (13.7 bar), 1000 psi (68.9 bar)
Air control Chargeable
ใบรับรองและการทดสอบ ATEX, NSF, CRN, PED, ARRA, 3.1 Cert, Material Cert, Cert of Origin, Hydrostatic, Dye Penetrant, Radiography, PMI, Bolt Tensile, Customer Specified

85IN3 SENTRY II

ข้อมูล 85IN3 SENTRY II
ปริมาตร 85 in³ (1.4 L)
วัสดุตัวเรือน (Housing) Acetal, Conductive Polypropylene, CPVC, Polypropylene, PTFE, PVC, PVDF, Alloy 20, Carbon Steel, Hastelloy C, Stainless Steel, 30 RA Polished SS
วัสดุ Bladder Aflas, Buna-N, Buna-N (Food Grade), EPDM, Hypalon, Neoprene, PTFE, Santoprene, Silicone (Food Grade), Viton
ขนาดทางเข้า 0.5" (15mm), 0.75" (20mm), 1" (25mm), 1.5" (40mm) Tri-clamp
รูปแบบการต่อ FNPT, BSP, ANSI Flange, DN Flange, Socket Weld, Tri-Clamp, Union
Pressure rating 150 psi (10.3 bar), PVDF 250 psi (17.2 bar), 1000 psi (68.9 bar)
Air control Chargeable
ใบรับรองและการทดสอบ ATEX, NSF, CRN, PED, ARRA, 3.1 Cert, Material Cert, Cert of Origin, Hydrostatic, Dye Penetrant, Radiography, PMI, Bolt Tensile, Customer Specified

370IN3 SENTRY I

ข้อมูล 370IN3 SENTRY I
ปริมาตร 370 in³ (6.06 L)
วัสดุตัวเรือน (Housing) Polypropylene, PTFE, PVC, PVDF, Alloy 20, Hastelloy C, Stainless Steel, 30 RA Polished SS
วัสดุ Bladder Aflas, Buna-N, EPDM, Hypalon, Neoprene, PTFE, Santoprene, Silicone (Food Grade), Viton, SS Metal Bellows (Series 2420)
ขนาดทางเข้า 1.5" (40mm), 2" (50mm), 2.5" (65mm) Tri-clamp
รูปแบบการต่อ FNPT, BSP, ANSI Flange, DN Flange, Socket Weld, Tri-Clamp, Union
Pressure rating 150 psi (10.3 bar), PVDF 200 psi (13.7 bar), 1000 psi (68.9 bar)
Air control Chargeable
ใบรับรองและการทดสอบ ATEX, NSF, CRN, PED, ARRA, 3.1 Cert, Material Cert, Cert of Origin, Hydrostatic, Dye Penetrant, Radiography, PMI, Bolt Tensile, Customer Specified

1155IN3 SENTRY IV

ข้อมูล 1155IN3 SENTRY IV
ปริมาตร 1155 in³ (18.93 L)
วัสดุตัวเรือน (Housing) Polypropylene, Aluminum, Epoxy Coated Aluminum, Alloy 20, Carbon Steel, Epoxy Coated Carbon Steel, Hastelloy C, Stainless Steel, 30 RA Polished SS
วัสดุ Bladder Buna-N, EPDM, EPDM (Food Grade), Hypalon, Neoprene, PTFE, Silicone (Food Grade), Viton
ขนาดทางเข้า 3" (80mm), 4" (100mm), 6" (150mm)
รูปแบบการต่อ FNPT, ANSI Flange, DN Flange, Tri-Clamp
Pressure rating 150 psi (10.3 bar), 275 psi (18.9 bar)
Air control Chargeable
ใบรับรองและการทดสอบ ATEX, PED, ARRA, 3.1 Cert, Material Cert, Cert of Origin, Hydrostatic, Dye Penetrant, PMI, Bolt Tensile, Customer Specified

2310IN3 SENTRY V

ข้อมูล 2310IN3 SENTRY V
ปริมาตร 2310 in³ (37.85 L)
วัสดุตัวเรือน (Housing) Carbon Steel, Epoxy Coated Carbon Steel, Stainless Steel
วัสดุ Bladder Buna-N, EPDM, EPDM (Food Grade), Hypalon, Neoprene, Silicone (Food Grade), Viton
ขนาดทางเข้า 3" (80mm), 4" (100mm), 6" (150mm)
รูปแบบการต่อ FNPT, ANSI Flange, DN Flange
Pressure rating 275 psi (18.9 bar)
Air control Chargeable
ใบรับรองและการทดสอบ ATEX, PED, ARRA, 3.1 Cert, Material Cert, Cert of Origin, Hydrostatic, Dye Penetrant, PMI, Bolt Tensile, Customer Specified

SENTRY Automatic Inlet Stabilizer

Inlet stabilizer สำหรับปั๊ม AODD ขนาด 1.5″ และ 2″ ใช้วาล์วควบคุมลมอัตโนมัติที่มี venturi valve ในตัว ยก bladder ขึ้นเมื่อเกิดสุญญากาศ และใช้ลมอัดดัน bladder ลงเมื่อแรงดันเป็นบวก ไม่ต้องปรับตั้งด้วยมือ ต้องต่อแหล่งลมอัดถาวร (US Patent 11,828,303 B2)

ข้อมูล SENTRY Automatic Inlet Stabilizer
รหัสรุ่น (ตามคู่มือ I&O) AIS-15 (1.5"), AIS-20 (2")
วัสดุตัวเรือน (Housing) Stainless Steel
Diaphragm PTFE
ขนาดทางเข้า 1.5", 2" (สำหรับทางเข้าปั๊ม AODD ขนาด 1.5" และ 2")
รูปแบบการต่อ FNPT, BSP, ANSI Flange, Tri-Clamp
Pressure rating +50/−30 psi (+3.45/−2.07 bar)
Air control Automatic (ต้องมีแหล่งลมอัดถาวร)
อุณหภูมิ (ตามคู่มือ I&O) PTFE diaphragm +4 ถึง +104 °C (+40 ถึง +220 °F)
ใบรับรองและการทดสอบ 3.1 Cert, Material Cert, Cert of Origin, Hydrostatic, Dye Penetrant, Radiography, PMI, Bolt Tensile, Customer Specified

หน้าภาพรวม Inlet Stabilizers ของ Blacoh ระบุ pressure rating ของรุ่นนี้เป็น 150 psi (10.3 bar) แผ่นพับระบุ Max +/-50 psi และคู่มือ I&O ระบุ MAWP 50 psi (3.4 bar) ค่าในตารางใช้ตามหน้าสินค้าของรุ่นนี้และ Capabilities Guide

ขนาด (Dimensions)

ขนาด A B C
SENTRY Automatic Inlet Stabilizer 10.43" (265mm) 10.6" (270mm) 13.75" (350mm)

วัสดุที่เลือกได้ (Materials)

Housing Construction: รหัสซีรีส์และวัสดุ wetted/nonwetted ตามรุ่น

10IN3 SENTRY III

กลุ่ม Series Wetted/Nonwetted
Plastic 10D Acetal
Plastic 10PP Polypropylene
Plastic 10PVC PVC
Plastic 10X CPVC
Plastic 10K PVDF
Metal 1020 Stainless Steel
Metal 1070 Alloy 20
Metal 1075 Alloy 20/Stainless Steel
Metal 1085 Hastelloy C/Stainless Steel
Metal 7320 Stainless Steel (Tri-clamp)
Metal 8320 Stainless Steel 30 RA Polish (Tri-clamp)

85IN3 SENTRY II

กลุ่ม Series Wetted/Nonwetted
Plastic 301 Polypropylene
Plastic 305 Polypropylene (0.5")
Plastic 311 PVC
Plastic 315 PVC (0.5")
Plastic 321 Conductive Polypropylene
Plastic 331 CPVC
Plastic 335 CPVC (0.5")
Plastic 401 PVDF/Polypropylene
Plastic 421 PVDF
Plastic 651 PTFE
Plastic 801 Acetal/Polypropylene
Metal 3020 Stainless Steel
Metal 3040 Carbon Steel
Metal 3075 Alloy 20/Stainless Steel
Metal 3085 Hastelloy C/Stainless Steel
Metal 7220 Stainless Steel (Tri-clamp)
Metal 8220 Stainless Steel 30 RA Polish (Tri-clamp)

370IN3 SENTRY I

กลุ่ม Series Wetted/Nonwetted
Plastic 101 Polypropylene
Plastic 105 Polypropylene (1.5")
Plastic 111 PVC
Plastic 115 PVC (1.5")
Plastic 201 PVDF/Polypropylene
Plastic 221 PVDF
Plastic 551 PTFE
Metal 2075 Alloy 20/Stainless Steel
Metal 2085 Hastelloy C/Stainless Steel
Metal 2400 Stainless Steel/Polypropylene
Metal 2420 Stainless Steel
Metal 7120 Stainless Steel (Tri-clamp)
Metal 8121 Stainless Steel 30 RA Polish (Tri-clamp)

1155IN3 SENTRY IV

กลุ่ม Series Wetted/Nonwetted
Plastic P4000 Polypropylene
Epoxy Coated 4010 Epoxy Coating Aluminum/Aluminum
Epoxy Coated 4015 Epoxy Coated Aluminum
Epoxy Coated 4045 Epoxy Coated Carbon Steel
Epoxy Coated 4046 Epoxy Coated Carbon Steel/Aluminum
Epoxy Coated 4065 Stainless Steel/Epoxy Coated Carbon Steel
Metal 4000 Aluminum
Metal 4020 Stainless Steel
Metal 4030 Carbon Steel/Aluminum
Metal 4040 Carbon Steel
Metal 4050 Stainless Steel/Aluminum
Metal 4060 Stainless Steel/Carbon Steel
Metal 4075 Alloy 20/Stainless Steel
Metal 4080 Hastelloy C
Metal 4085 Hastelloy C/Stainless Steel
Metal 7420 Stainless Steel (Tri-clamp)
Metal 8420 Stainless Steel 30 RA Polish

2310IN3 SENTRY V

Series Wetted/Nonwetted
5020 Stainless Steel
5040 Carbon Steel
5045 Epoxy Coated Carbon Steel

เอกสารประกอบ

ไม่แน่ใจว่าใช้รุ่นไหน
ส่งเนมเพลทให้ทีมช่วยเทียบ

ส่งรายละเอียดการใช้งานมาให้เรา ทีมวิศวกรจะช่วยวิเคราะห์และแนะนำรุ่นที่เหมาะสมให้

อีเมล info@novatech.co.th